U-Match DC Inverter (Regular)

18K | 24K | 30K | 36K | 42K | 48K


  • All DC inverter compressor and DC motor are adopted, so the energy efficiency of the unit is higher and the power consumption in standby is lower.
  • Intelligent defrosting technology is applied. Defrosting is performed according to the actual frosting status judged by the temperature sensor, which effectively improves heating efficiency and ensures comfort in the room.
  • Cooling and heating function at low ambient temperature is available. The unit can cool normally at an outdoor temperature of 0℉ and heat normally at an outdoor temperature of 0℉.
  • The I-demand function is available. When the energy-saving mode command is received by the outdoor unit, the upper power limit of the unit will be controlled, with energy-saving of 25%.

Indoor Unit Selection


U-match is a kind of system that the outdoor unit can be freely connected to different types of indoor units according to various indoor decoration requirements.


U-Match (Regular) 18K


U-Match (Regular)  24K


U-Match (Regular)  30K


U-Match (Regular)  36K


U-Match (Regular)  42K


U-Match (Regular)  48K

U-Match DC Inverter (High ESP)

18~30K | 36~42K | 48K


  • Adopt all DC inverter compressor design to improve the energy efficiency of the unit; SEER and HSPE for the whole series is up to 16 and 19 respectively.
  • The indoor unit adopts DC motor design, with a wide static pressure range. The nominal static pressure is 50Pa and the maximum static pressure is up to 200Pa. It can satisfy the requirements of long-distance air supply as well as multiple rooms’ air supply.
  • The whole series units have AHRI certificates and ETL safety certificates. The unit adopts metal propeller housing, metal blade and metal filter, and the inside insulation sponge has especially used the high-grade fireproof.
  • Low power consumption design (1W standby). The standby power consumption for the complete unit is only about 1W, while the standby power consumption for the normal 5HP unit is more than 10W. Therefore, the energy efficiency under standby status is improved by 10 times.
  • Wide operation range: 0℉~118.4℉ for cooling and 0℉~75.2℉ for heating.

Indoor Unit Selection


U-match is a kind of system that the outdoor unit can be freely connected to different types of indoor units according to various indoor decoration requirements.

The U-Match DC Inverter (High ESP) can connect to two types of indoor unit:

  • Duct type
  • Air handler


U-Match (High ESP)  18K, 24K, 30K


U-Match (High ESP)  36K, 42K


U-Match (High ESP)  48K